Original Prusa Enclosure Webcam Mount

I wanted a very compact and simple webcam mount for my Logitech C920 with a standard ¼ inch thread to attach to one corner of the Original Prusa Enclosure.

On one side, it has a 2.8mm hole to attach with an M3x8 screw (use one of the spares that come with the enclosure).

On the other side, I've modeled a standard ¼"-20 screw. You can use adapters like the one in the picture (male-to-male ¼"-20) to then attach any camera (like this one: https://www.amazon.co.uk/Standard-Threaded-Mounting-Converter-Precision/dp/B074J4Z7ZF)

The lateral angle will be fixed on a C920, but the angle will work well for Octolapse with “Centre-Right” extruder stabilisation (you can still change the vertical angle using the camera mount swivel). I've included a (very blurry!) picture of what the angle loooks like.

Printed with PETG at 0.2mm with default settings and it works like a charm.

EDIT: Check out @Torpi's screw adapter here: https://www.printables.com/model/405904-standard-14-20-male-to-male-screw if you can't find one where you live (or you'd rather print your own!)