Toilet Brush
Description
PDFA toilet brush for when you can't leave the house!
No flexible filament used. Only PETG or PLA. PETG provides a more flexible/"softer" bristle.
Support wall has built in fracture lines to make removal with snips easier. Peeling away the support wall is easier with PETG. PLA s more likely to break but this is just support material.
Four piece construction and can fit on a single Prusa Mini bed (without a skirt) resulting in a 28cm handle and a container.
Treat as disposable. 3D print plastics are porous and will harbour more dirt and germs than materials designed for purpose. Test on inconspicuous surface.
Be patient with the .f3d.
Print instructions
Tested:
Prusament PETG/Generic PLA
PrusaSlicer Default Settings
0.4mm nozzle
0.2mm Quality MK3
15% Honeycomb Infill
Brim used to stabalise bristle wall
Recommend screwing brush to handle, then removing wall. Less damage to bristles.
Fracture lines in wall can be helped with snipping end of the line.
Peel around the brush head snipping each bristle (see third picture). Keep snips flush to wall when cutting.
Trim off sharp bristles.
Model origin
The author hasn't provided the model origin yet.
