Filament Shelf (19mm tube)
Filament spool shelf bracket designed to support standard 19mm tube available in the UK.
10
101
1
805
updated
March 4, 2023
Description
PDF| This model still works great, but there is an updated version that is even easier to use and modify. |
An adaption of the original Filament Shelf by Layer Labs, designed to support the standard 19mm wardrobe rail tubing available in the UK, it was also resized to print perfectly on an Ender 3 print bed (235x235mm) without any spools touching the wall.
The example uses the Interior Multi Rail Tube from Wickes and combines this with end caps taken from Parametric Tube Cap by Spongebob.
The original Filament Shelf STL was also converted into Autodesk Fusion 360 so further modifications can be made by anyone with a copy of Fusion 360.
Print instructions
- Supports Needed: Optional / Minimal (just for screw holes)
- Bed Plate Adhesion Needed: None
- Print Orientation: Print on either side of the print bed
- Materials: PLA, PETG etc. (example was printed with PolyTerra PLA in Cotton White)
Tags
Model origin
The author remixed this model.
