Magnetic Spring Desk Toy (10x2mm)

I modified the original STLs in Tinkercad to accommodate 10x2mm magnets which were laying around unused. The original design used 2 different sized magnets but my remix seems to work fine with a single size.

Printed with a layer height of 0.2 on my Prusa Mini. Insert a pause at layer 16 (3.2mm) for the frame and layer 18 (3.6mm) for the hammer to insert the magnets.

Before inserting the frame magnets, stick them together then mark the exposed sides with a marker. When you insert them, make sure you see the mark on both magnets.

Instead of a metal rod I used filament which I carefully glued in place.