Wall mount for Makita dual battery charger

Brackets to hold the Makita dual battery charger to the wall.

Print two of the lower brackets and one of the upper. Screw the two lower brackets into the wall, place the charger on them, and screw the upper bracket into place to hold it.

Print settings (with 0.6mm nozzle, but something similar should be fine for 0.4):

• “0.30mm Quality” profile as base
• 4 perimeters
• Printed lying down
• For the ‘Lower’ bracket I added supports with the style set to “snug” to only have supports between the arms - see attached image.