Tilting Base for Revopoint Pop2/Mini Turntable

I was inspired by the Revopoint automatic dual-axis turntable, and designed this manual one.

The separate ring is for easy printing and eliminates the need for support.

The base and dome do not require much infill - I used 4%. For smoothness of the inside of the base and the dome, I suggest using up to 0.15mm layer height.

To increase friction between the dome and the base, I added some masking tape as shown in the pictures.

For long-term use, I suggest super-glueing the ring to the dome.

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

No

Supports:

No

Resolution:

0.15mm

Infill:

4%

Notes:

Obviously, flip the ring and dome for printing without support.

Custom Section