Prevents dust from easily entering your drink.
The cover springs up on its own when lifting your cup.
There are inbuilt channels to hold condensate.
Recommended to print in ABS if used to hold hot drinks, PLA will warp due to the heat.
No additional parts needed to fit together, only 3D printed parts.
Can accommodate up to 95mm tall, 105mm outer diameter cups.
Able to be used without the cover as well.
How to assemble:
cover is press fit onto the stem
stem is clipped onto a shaft in the base
Prusa MK2S
Printed in ABS
0.2 layer height
used raft
200% first layer to help with bed adhesion
printed in enclosure
The author hasn't provided the model origin yet.
