3rd gen Toyota Tacoma Blue Sea Systems fuse block and breaker mount

Fits 3rd generation Toyota Tacoma in the engine bay right next to the existing fuse box. This was designed for the Blue Sea Systems 6 circuit ST Blade ATO/ATC Fuse Block and 187 Series Panel Mount circuit breaker.

MUST be printed with ABS or other filament capable of withstanding high heat emitted from the engine!

My print settings on MK3S+:

• Printed with Inland ABS @ 260c nozzle / 105c bed on LT-11 satin sheet
• .6mm nozzle
• .35 layer height
• 5 perimeters
• .85 extrusion width
• 15% infill

Additional holes for mounting up to 4 relays.

M6 bolts/washers/nuts are necessary to mount fuse block and circuit breaker to the bracket. Works best if you have a tight enough fit to use a soldering iron or other heat source to heat up the M6 nuts and press them into place so they don't come loose and drop down into the engine compartment while you're installing it. Glue will also work.

Attaches to the two open bolt holes on the right side of the engine bay (when viewing from the front of the truck) just above the fuse box.

Will include the 3MF and F3D files for anyone who may wish to modify it to fix other similar fuse boxes/circuit breakers.