Thinner Cable Guide for Chodec's direct drive

Note: This is my first time using Fusion360 and i do not know what i am really doing. I also included STEP file and the F3D file that I modified from the original post. STL is upside down, be sure rotate it so that the flat part is on the bed before printing. But i printed it and it worked perfectly so here it goes:

Original one was a bit thick and was too close to the wheels for my taste and guided cable to the back of the printer. But the cable hit the left side of the printer before reaching the X axis endstop on my printer. I did not need the jst connectors inside the guide so i made it about half the thickness and added a couple more zip tie slots.

This part is independent of the other parts(like the original), so you can use it with other hotend designs too if you cables go that way.