Controller Wall Mount - Xbox One, PS4, Switch Pro Contoller | Possibly many others. Print and Check

Made this controller wall mount holder because I didn't want to use screws. You can use any double-sided type you like (the one I used). Stick two lengths to the back (see picture 4) and stick it to a wall and you're done. I've been using this model for 8 months with no issue at all. 

Print at 

Draft : 0.3 Resolution

Infill: 15 %

Filament used: PETG - you can use any material you like. 

Print time ~ 2 hour 5mins

I take no responsibility if the tape you choose to use fails over time.