Prusa Face Shield Speedprint - RC2 - A4/Letter ISO838

UPDATE: Added a V2 of the NA2 Letter version that might fit better. I don't have tools to test so please give feedback if it makes a difference.

UPDATE: Added STEP files so anyone can edit the design or build stacks for even faster printing. Also fixed the NA versions where I missed to add the fabrication clips.

I moved this from the original remix as that page got stuck processing files.

This is basically a Remix of the RC2 version that prints way faster and also makes it possible to use an A4 sheet/Letter transparent plastic as those are widely avaible. Overhead paper should work fine!

Use a normal Paper Hole Punching tool set to A6 from each of the long sides on a regular A4 or on the short side on a A3 (thanks Per Mejdal Rasmussen for the A3 idea) transparent sheet.

DISCLAIMER!
This product is a work in progress and I take NO responsible for the use of this design in real world usage. Also take in consideration that when used with an A4 sheet the length of the protection vertically will be reduced, this might have an impact on the functionality compared to the original design. Consider using A3 instead for better protection. Always consult with professional medical staff before using this.

Make sure to read ALL documentation/information Josef Prusa and his team at Prusa Research has published on the original make before using this design.

Original design by Prusa Research can be found here:
https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2