Power Supply fixture for E-Scooter 38mm head tube

For the Aldi Maginon Street One. Its Power supply fits in and ins mountable at the 38mm dia head tube.
Three M8 Screws are included.
A Cable holder is integrated in the print as Breakaway.
All 4 parts print together.
No Support needed.
Only 3mm Allen key needed for fixing. This Scooter has limited range of 10km only and the purpose for this Print is to make the Scooter a plug in device for recharging at any Wall socket
Standard with PETG works fine for mk3s

Print instructions

Prusa PETG 5 to 20% infill 0.5mm nozzle 0.15mm fast prusa slic3r gcode prints ~8.5hours. A little stringing at my material, went better after drying ( Bake your PETG 80° 4hours after preheated in circulated Air Oven.)

PLA works, but power supply generates Heat and model will deform due to, also when placed in the sun.

Footprint 65 x 75
Heigth 130 mm (complete)
Heighth 50 mm ( Cable holder and screws)
Heighth 18 mm ( 3 Screws )