Sony ICD-UX570 voice recorder stand

This is a stand for the sony icd-ux570 voice recorder. It's setup to point downwards towards a laptop while keeping it off of the desk

The pins that hold the top and bottom together are designed to go through a 2.5mm hole (the pin holes are 2.6mm), so i recommend drill/reaming out the hole with a 2.5mm bit. Print the top at 100% and print the base at 99% and it should be a tight fit. As show this was printed at 0.20mm layer height with a 0.4mm nozzle with white hatchbox pla