AtomRc Dolphin elevon

Atomrc Dolphin elevon

Three different types:

1. Plane elevon,  you need to glue in servo horn andduct tape elevon to main part of the wing
2. plane elevon with place for connectors to the wing (use 16mmx28mm)
3. With place for horns and connectors (see picture)

Print settings:

Polilite Pla:
Layer hight 0.2
Perimeters 1
Solid layers bottom 1, top-3
Infill rectilinear 7-10%
combine infill every 1 layer
Support for support enforcers only- paint it!
Speed:
Perimeters 35mms
infill perineters overlap 22%
Print temp 220 st.C
Bed 55 st.C

If you appreciate my work you can buy me a coffe ;)

https://www.buymeacoffee.com/bunkw420h