E3V2_4040_Cable_Chain_Cap

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/g6mrlttqMjA

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Filament: Smith3D PLA Red

Notes:

End cap anchor for the extruder and hotend cables. The layout of the components of the E3V2 is slightly different than the E3/Pro so I remixed 2 parts to anchor the start of the extruder & hotend cables to the 4040 cap :

"V-Slot 4040 End Cap" by Bobnet () and "cableChain\_bedCorner\_v2" by johnnywhiskie ().

It was initially printed it without the holes, but the fit was a little too loose with the tension from the cable on the chain. So I drilled 2 holes and fixed with M5 bolts. The holes were only added after, so please check for correctness before you print the entire model.

Post-Printing

Category: 3D Printing