Phone wall mount variations

Phone wall mount variations.

There are 5 models (Simple and “Complex”) and a dummy phone if you want to doublecheck  dimensions by using a simple phone model.

I used it for a 158.3 x 73.3 x 8.2mm phone in a soft case so the phone and the case are around 162 x 78 x 10mm.

Attachments:
          A drawing with a few dimensions (please check the attached pdf) if you want to double-check something.

          .SHAPR file if you want to change something in the Parasolid version.

.STL, .3MF files for 3D printing.

Print settings:
Print it from the bottom to the top ( as pictured in Prusa Slicer screenshot ), this way support is not required. Nothing special. 

Infill: My recommendation is around 25-30% infill but it depends on your material/printer.
I used PLA+ 25% without any problems (PRUSA Mini)