Material Swatches

Prints out of PLA in less than 30 minutes!

I've included versions for PLA, PETG, ABS, and ASA. I also designed a blank one as well as one that has an indent to add some painter's tape with a written label. 
There's also STEP file available if you want to add your own text for a specific material. 
I included a basic drawing for measuring printer accuracy. The holes on the back are about 0.15mm larger than the pins to allow for the swatches to stack.

Suggested Print Settings:
Layer Height: 0.2mm
Perimiters: 2
Infill Pattern: Gyroid
Infill Percentage: 15%
Supports: None