Desktop Fountain Flower Pot

This is a remix on 3D printy's Desktop Fountain. My fountain is using all of 3D printy's original models except the splash guard. The “splash guard with no leaks” is willsides which I used a dremmel to cut out the wire hole.

This remix includes the below models:

Desktop Fountain-FlowerPlateOffCenter - So a small plant can fit in it and still overhang a little bit without getting in the way of the center of the fountain.

Desktop Fountain-FlowerPlateCenter - As the name suggests, the mounting hole is centered so the pot will be perfectly centered wherever you place it.

Desktop Foutain Flower-stem-medium - This is the same stem as from 3D printy's original model but it is the one I used as I thought it was a perfect height.

Desktop Fountain-FlowerPot - The flower pot itself. I was able to perfectly fit 1 small succulent in it. To secure it to the stem, I used super glue as I did not want any holes in the pot and did not want to take any chances of it falling off the stem.

References/remixed from:

3D Printy Desktop Fountain: Modular Desktop Fountain by 3D Printy | Download free STL model | Printables.com

Splash Guard: Splash Guard with No Leaks - Modular Desktop Fountain Remix by willsside | Download free STL model | Printables.com

Original perforated plate with wire hole: Plateau Step Plate Cord (Modular Desktop Fountain) by bnorick | Download free STL model | Printables.com