Park table (configurable)

Park table (configurable)
I was inspired by the FalcoBloc park table (https://www.falcogmbh.de/produkte/stadtmobiliar/picknicksets-und-tische/falcobloc-tisch.html), which can be found in some German cities. I recreated them in a scale of 1:25, ideal for PlayMobil.
 

The SCAD file for OpenScad is also included, i.e. other dimensions are also possible. 
 

Monochrome printing: Print MyParktable.stl with 0.2 mm upside down without support.
 

Two-color printing: 
Print MyParktable_Legs in one color for example silver. Support is not needed.
Print MyParktable_Top in another color and if you want change to the first color before printing the two braces.If "<space>" is small you also need no support.

You need some glue to put the thinks together.
 

For printing I used the PrusaSlicer 2.4.2 and my original PrusaMini.

This table fits with my Park bench (configurable): https://www.printables.com/de/model/251988-park-bench-configurable