Dust Commander cyclone dust separator to osVAC conversion

osVAC conversion adapters for Dust Commander cyclone dust separator.

With these adapters you can attach osVAC hoses directly to the Dust Commander.

Also check out my osVAC pressure relief valve adapter.

The female connector uses my osVAC leak tight conversion, you can add a 37x32mm O-Ring (really cheap one will do) to achieve an air tight fit. Not mounting the O-Ring will result in a standard osVAC connector, it is fully backwards compatible

*edit: apparently the female STL was non manifold when using some slicers (I didn't have any issues using Prusa Slicer), so I uploaded a fixed version and the STL and f3d.

Category: Tools