Tomb Tapper / Thaalud

• THIS SCULPT HAS NOT BEEN TEST-PRINTED YET, THE FIT OF THE SEPARATE COMPONENTS IS UNCERTAIN AND MAY NEED ADDITIONAL SEPARATIONS / SANDING / FINISHING / FILLING TO FIT SNUGLY AFTER PRINTING

Several variations have been included: one with the whole model together (Tomb Tapper Combined.stl) , one with the top teeth removed for separate printing (Tomb Tapper No Upper Teeth.stl + Tomb Tapper Upper Teeth Only.stl, you will need to orient the separate teeth upward and if printing with FDM, sink them slightly into the build plate for good adhesion) and one where the top and bottom of the creature are completely separate (Tomb Tapper Top w Hammer and Teeth.stl and Tomb Tapper Lower With Tongue and Teeth.stl).

Tomb Tappers or Thaalud are ancient constructs from a bygone empire made to smash evil magic casting creatures and also hoard magic items because reasons!

If you would like to know more check out DM Dave's excellent write up here

This is a 28mm scale miniature, suitable for tabletop roleplaying games such as Dungeons and Dragons or Pathfinder. No base is supplied, but is scaled to fit on a HUGE sized base (76.2 mm / 3 inch diameter).

If you liked this model and want to show your thanks, you can buy me a coffee!

And follow me on Instagram!