Toilet paper holder with lid, smooth rolling & tearing mechanism

Wall mountable toilet paper roll holder for standard 115mm rolls (45mm core diameter). Following are the features:

1. Can be easily mounted to the wall using the inbuilt hook holes and holders using 3M tape or can be used directly with traditional drilled nails.
2. Spill(water) proof holder protects toilet paper roll from cats and kids
3. Comes with a lid which can hold small objects and phone
4. Toilet paper is held in place using rod which is supported by 'U' hooks. It helps in smooth rolling of the paper
5. Equipped with Spikes at the bottom for easily tearing the paper off.
6. Roll can be easily replaced/inserted to the rod which can be mounted on ‘U’ hooks.


Printing Instructions:
1 x Container (main part) - Some sanding and filing can be done to sharpen the spikes (optional), Container can be print without support if your printer has good overhang performance, without support the top layer prints(spikes) might not come out well.
1 x Lid 
2 x wall sticking hooks - use 3M tape / strong tape to stick to the walls
2 x ‘U’ Hooks - Stick the U hooks to the inner walls of the container as seen in the images with super glue
1 x Rod to hold toilet paper