Bambu Lab X1(C) light frame

No support needed. Upgrade for Bambu Lab X1(C) owners. 100% at 240mm by 240mm.
184
566
1
10 k
updated August 25, 2022

Description

PDF

Inspired by one of the printer owner's design of a light box. I had bought DC 5V COB LED strip with USB switch and L connectors from local hardware store.

Width of the COB LED strip is 8mm

Created it to practise using Fusion360

If printed on Bambu Lab printers, you will need to make some changes to the printer settings. This info can be found here:

https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations

I had only followed and made changes to the excluded bed area. I left the other settings the same since I did not require a print height of 256mm for this model.

=============================================================

Printed with Generic Black PETG in default settings
No Support Required

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more