FPV Micro Quad Racing Gates

Build your own indoor racing air gates or pylons. Just print out the base parts, one or more connectors, and buy some 1/2" pipe insulation from your local home improvement store.

You can use a string to keep the gate feet together. Optionally you can also tape them down using some painter's masking tape.

I've included the OpenSCAD file in case you need to adjust the dimensions for your pipe insulation.

I used colored duct tape to give them a bit of flair and make them easier to see when flying FPV.

Post-Printing

Follow photos

Just add 1/2" pipe insulation and colored tape. I used two pieced with a single connector for my gates, but you can make them larger or smaller if you wish.

How I Designed This:

OpenSCAD

OpenSCAD file is included for your modifications.

Category: R/C Vehicles