Artillery Sidewinder X1 dual Z endstop attachment

My dual Z endstop attachment bracket for the Sidewinder X1.

I wanted the Sensor to be triggered by the exact same surface (the 20x60 extrusion) as the first z endstop. There is not much space to achieve this, but it turned out to be a perfect fit.

Once the bracket is attached to the drop in t-nuts, the sensor height can be adjusted to the same level as the original one, without the hassle of the t-nuts falling out of the slot as the bracket prevents them from rotating.

hardware need:

1x aditional sidewinder endstop sensor

3x 10mm M3 bolts

3x 3,2mm washers

1x M3 nut (3x if you use 3d printed t-nuts)

3x 3,2mm washers

2x M3 drop in t-nuts for 6mm slot