A1200.net rear trapdoor for Indivision AGA MK3

This is a rear trapdoor and a holder frame for the HDMI output of the Individual Computers Indivision AGA MK3 on an Amiga 1200. The design is specially made for A1200.net replica cases, and may not work for classic Amiga 1200 cases.

It seems that the screw position of the rear connector is a bit different on the replica case. When I tried to mount the HDMI connector, I found that existing rear trapdoor designs wouldn't really match the position of the port.

Also the HDMI connector board can only be fixed by a single screw, so the board can pivot around it. With the additional holder frame, the board is kept held in position.

Printing

The rear trapdoor came out fine for me even without supports. It's worth a try.

The holder frame does not need supports anyway.

I used simple PLA for both parts.

Copyright

• The rear trapdoor bases on a design by NoenDex. I added a cutout for the HDMI port.
• The holder frame is my own work.

Both designs are distributed under CC BY-SA license.