Hinge pin

The 10mm bar I had was rather too snug for my liking so I modeled a replacement part with a diameter of 9.8mm to account for my printers inaccuracy. I also added a threaded 4mm hole on one end so it can be pulled out easily.

Hope this is useful to others, total print time was about 4.5 hours with my printers settings.

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

No

Supports:

No

Resolution:

0.08

Infill:

80%

Filament: Hatchbox PETG White