Stretchi! - Reusable silicone-sealing food gadget

Stretchi is a sealable kitchen gadget useful for keeping foods like half-avocados, half-pears, or watermelon slices, fresh!

When you put food in it, it simply expands by pushing the stretchy silicone outwards! No unwanted air (ew!) and no nonsense!

Included are the original files, useful if you wanted to increase or decrease Stretchi's size (and still have screws fit).

Right now, you'll need:

• 8x M2 12mm screws (measured from top of head to bottom)
• Some reusable (food safe) silicone sheeting. Anything from 0.4 - 1.0 mm should work. Take a look here if you're not sure where to pick some up: https://silex.co.uk/shop/sheeting/solid-sheet/ultra-thin-silicone-sheet/

Assemble by squishing and screwing the silicone sheet between the two top circles and tightening down the bolts. Screw together the bottom and top pieces and bam, dunzo!

That's it! You're ready to both save the environment and take care of your health. Remember that PLA, PP, co-polyester, PET, PET-G, HIPS, and nylon-6, as well as some brands of ABS, ASA, and PEI are all food-safe (https://formlabs.com/uk/blog/guide-to-food-safe-3d-printing/).

Print settings:

0.12 layer height

25% Infill

3 walls

4-7 roof/ceilings

40-50mm/s

Happy printing!

(Avo used in render is by svnfbgr: https://sketchfab.com/3d-models/half-avocado-36443c0fd59a4b98b3312401c6b9d50c)