Decorative Circular Wall Organizers

Decorative Circular Wall Organizers

These two circular wall organizers are partly designed for decoration and partly to be able to hold small items on the interior platforms.

Key Dimensions

The overall diameter is 210.00 mm. Interior dimensions of the platforms from bottom to top and left to right are:

• Angular Divider Organizer
  • 67.72 mm width by 46.00 mm depth by 65.458 mm height
  • 78.565 mm width by 46.00 mm depth by 35.93 mm height
  • 105.257 mm width by 46.00 mm depth by 60.647 mm height
  • 94.371 mm width by 46.00 mm depth by 43.151 mm height
  • 99.573 mm width by 46.00 mm depth by up to 66.404 mm height
  • 79.161 mm width by 46.00 mm depth by up to 48.512 mm height
• Curvy Divider Organizer
  • 72.922 mm width by 49.00 mm depth by 63.211 mm height
  • 65.149 mm width by 49.00 mm depth by 31.841 mm height
  • 75.316 mm width by 49.00 mm depth by up to 100.085 mm height
  • 124.831 mm width by 49.00 mm height by up to 100.085 mm height

Non-Print Materials Required

These parts are designed to be mounted with 3M Command Large Picture Hanging Strips (16 lbs): one on the left side and one on the right oriented vertically where there is a rectangular back plate.

Printing Advice

I printed these with 0.20 mm layer height and with a high-strength (6 perimeters) variant of the Quality preset. In hindsight I think that given that this is designed for lightweight items strength probably isn't a huge consideration anyway, so a regular speed-oriented setting could likely be used without issue.