Resident Evil 2 and Village Key Wall Holder

Resident Evil 2 and Village Key Wall Holder

This wall holder is designed to hold replicas of the four precinct keys from Resident Evil 2 as well the Six Winged Unborn Key from Resident Evil Village. Examples of the replicas in the picture are:

• Resident Evil 2 precinct keys: https://www.amazon.com/dp/B08NY5FX74
• Resident Evil Village Six Winged Unborn Key: https://www.amazon.com/dp/B07R66N9QC

There is slight curvature for the forks that the precinct keys slide into that helps keep them in place, and the village key should be inserted sideways then turned at which point it won't be able to fall out.

Key Dimensions

The upper key prongs are designed for 4.30 mm diameter keys; sufficiently smaller keys may fall through but. The lower key prong (for the Village key) measures 7.88 mm at the opening and then opens up to 16.92 mm afterward.

Non-Print Materials Required

This part is designed to be mounted with 3M Command Large Picture Hanging Strips (16 lbs) – just one oriented vertically down the narrow section in the center of the back.

Printing Advice

I used the 0.15 mm Quality PrusaSlicer preset to print this. Likely some speedier settings can be used, but I wanted to be confident that the curvature details are expressed since that's part of how the key retention works.