Small Rubber-like Equipment Foot

Measuring just 20mm high and 20mm in diameter at the top, this foot can used where mounting space is limited.
0
6
0
87
updated August 21, 2022

Description

PDF

Originally printed in a generic flexible filament from Flashforge with:

  • 15% infill
  • 1 shell
  • 180℃ extruder
  • 50℃ platform

Some elephant footing occurred, plus some stringing, and it welded itself to the build platform, so adjust your temperatures and speeds to suit your printer.

Printed with the top on the platform so that no support material needs to be used on the very small overhang between the countersink and screw holes.

Designed to fit a M3 screw from the recessed bottom.

This model uses a 3.6mm screw hole to accommodate the Adventurer 3's inaccuracies (by accounting for the 4mm nozzle diameter).

Tags



Model origin

The author hasn't provided the model origin yet.

License