Fauci admitting to lying.
Face shield - A4 binding sheet - easy punching
Makes
Comments
good good good good good good!
I have happily made a load of these! Great alternative to the unavailable commercial ones. It has helped a lot of people around me. Thanks for providing us with this nice model.
Perfekt!
Can I try print this with 0,8mm nozzle? Is this good idea? Someone try? (edited)
View one more comment
I print with 0,8mm nozzle rc3-no-hole with no problem. I print at same time 2 shield and time is 1h. One shield 30min. Layer height 0,4. (edited)
I print simplified remix, 2 pieces in 60 minutes with 0.6mm nozzle layer height 0.46: https://www.prusaprinters.org/prints/29700-prusa-shield-simplified-a4-hex-holes
Endlich ein Format, mit dem ich was anfangen kann! Simple Einstellungen beim Locher und nicht mit einem Lineal herummessen.Danke vielmals!
Die V2 ist super, bei der V3 sind die "Nippel" einen Hauch zu groß für die normalen Löcher eines Bürolochers.
Easy print ! Good job
This is my favortie faceshield design so far.
Great design, thank you!
any chance to get 3 (not stacked) on one printbed (prusa mk2/3)?
Great, nice to see that it is useful. Thx for photos