Infant Optics Baby Monitor Camera Adjustable Stand

This is an adjustable stand for an Infant Optics DXR-8 Camera. The camera usually cannot angle down low enough and so this stand allows it to be adjusted to get a better view of the crib. It's ideal for travelling as it allows the camera to sit on any flat surface and has a hollowed out section in the base for more weight to be added. I used steel ball bearings to add weight but anything heavy can be used. I printed with 15% infill with Hatchbox PLA and it works great.

Hardware

• 40mm M3 bolt and M3 hex nut for connecting the hinge piece
• 12mm M4 bolt and M4 hex nut for the camera attachment mount
• 2x 1 1/16 inch (27mm) steel ball bearings or BBs for adding weighting to the base so it doesn't tip over