tabo - 3d printed toilet paper

People are hoarding and fighting over toilet paper at the moment and this design is a response to those who were…
9h 31m
2× print file
0.35 mm
0.35 mm
0.40 mm
217.00 g
3
43
0
1164
updated March 21, 2020

Description

PDF

People are hoarding and fighting over toilet paper at the moment and this design is a response to those who were asking about 3d printed toilet paper ;-)

Most of the world's population manages without it and over in the Philippines this guy has plan: https://www.youtube.com/watch?v=Vzb98tQp53I

If by some rare chance you have a 3d printer handy and you don't feel like venturing to the shops, you can now print one too!

Print instructions

Settings

  • Doesn't need to be pretty so suggest fast settings:
    • 20% infill
    • .35mm layer height

Handle at top

  • Takes ~6hours/128g filament with these settings
  • Approx 33g wasted filament as support
  • Handle should be longer due to weight of water

Handle at bottom

  • Thanks to Zac Smith for this simple idea
  • Takes approx 3.5hrs/90g filament with these settings
  • Handle is slightly longer and thinner, no need for supports

Model origin

The author marked this model as their own original creation.

License