Thermal Label Printer Stand - Support Free

Edit 06 May 23:

If you're encountering interference with the labels and cables, @darkspeedy26 created an awesome label guide:

https://www.printables.com/model/472863-label-guide-for-thermal-label-printer-stand-suppor

Edit 22 Aug 22: Updated roller and roller pin dimensions for better fit/performance

After trying some of the other label printer stands on here, I either wasn't satisfied with the design or how they printed. It was time for me to take… a stand. Make a stand. I meant make a stand.

Key criteria for this design:

• No sharp corners, particularly on the outer perimeter
• Share a similar design with my label printer (Neflaca BT printer: https://a.co/d/c5VUsjs)
• Print quickly and easily without supports
• Magnets, because who gives a flux?

BOM

• 1x Stand (printed)
• 1x Roller (printed)
• 2x Roller Pins (printed)
• 2x 608ZZ Bearings
• (optional) 4x 6x3 Neodymium magnets 

Filament Material

• Any, but PLA is probably still the easiest. Get fancy if you want, doesn't bother me! :)

Printing/Assembly

1. Print stand design of your choice, roller, and roller pins in your choice of filament
2. (optional) Stack magnets together in pairs, then press into the small cavity where the label roll will rest
3. Insert roller pins into roller
4. Attach bearings to either side of roller
5. Insert roller through label roll 
6. Insert into stand