Sunlu S2 Mk3S Mount

Sunlu S2 mount for the top of the MK3S. Requires 2x 16mm M8 bolts to attach the tray to the mount.

• Requires use of the excellent Sunlu S2 Improvement Wedge. 
• Requires 2x 16mm M8 bolts to attach the tray/base to the mount. The tray's model is pre-threaded. 
• Wings are optional (they just prevent the filament from getting caught-up in occasional snags). Glue them to the sides.
• Angled downwards just enough to make this application work.
• Supports are not necessary. 
• PETG or ABS is recommended (though a good PLA might be fine).