Porsche 911 tail light housing

My first attempt at creating a printable taillight housing for a Porsche 911 G-model (1974-1989). My car "suffered" a 964 forward-date during which 964 taillight cups were welded in. 

The model is designed around bulb holders that I purchased from https://www.classiccarleds.co.uk/ (no affiliation).  In particular these items:

• BAY15D BULB HOLDER DUAL CONTACT OFFSET PIN STOP TAIL BRAKELIGHT GLB380 1157 (you need 2 of these)
• BA15S BULB HOLDER SINGLE CONTACT SIDELIGHT INDICATOR BRAKE FOG REVERSE 382 (you need 4 of these)

In order to fit these you will need to print the bulb holder adapters and glue them into the tail lights. In a future evolution I will aim to include the bulb holders into the main model to avoind having to glue them.

NOTE: This model is specifically designed to fit my molested car so I don't expect it to fit yours without some modifications. In particular, mounting brackets and some sort of shield to protect the electrical components will have to be added.

Due to the limited size of my printer the model is split into two parts that can either be glued or bolted together (bold holes are provided).