Stackable Toilet Paper Dispenser V2

This is an upgrade over my older model https://www.printables.com/model/258177-stackable-toilet-paper-dispenser-v2

This one is sturdier, uses dovetail joints and, depending on your printer's calibration, might not need glue for the parts to fit together. If you really need to use glue, super glue will do. The holder can be mounted to a wall using 3 screws.

The model is printed in parts to make it easier to print and to take advantage of orientation for strength. The parts are already oriented and have a chamfer at the bottom to counter elephant foot (which could make fitting the parts harder).

Update (13-APR-2023)

• Renamed MiddleFront to MiddleFrontStraightEdge
• Added MiddleFrontWithLugs to allow for more stages between the second row from the bottom and the top row.

Print Settings

Printer Brand:

Creality

Printer: 

CR-10S

Rafts:

No

Supports: 

No

Resolution:

0.32

Infill: 

25%

Filament: Any PLA Any

Category: Bathroom