5-in-1 Compact Phone Grip

Remixed from [thing:2194278]. 

Updates:

• Added “grip-knob-v2”. It's a shorter knob and feels better in the hand.
• Added a new articulated grip with:
  • real extendable selfie mode
  • taller and more practical stand mode
• Updated photos and parts needed.
• Added an improved design with an aditional function “Hook mode” and more stable “Stand mode”.
• Old models are moved to a ZIP file.

Description:

This phone grip has the following modes:

1. GRIP MODE: for a traditional camera style handling.
2. STAND MODE: for taking group photos or a simple phone stand.
3. HANDHELD MODE: for recording while moving.
4. SELFIE STICK MODE: for increasing the distance a bit more.
5. HANGING MODE: when you need to hang your phone from a rope or something.

It's important to note that the knob in the base is also the hand support point. Put it on the right side if you're right-handed, and left side for left-handers. See the pictures for an example.

Parts needed:

• (1x) M5 x 65mm bolt (it also works with 50mm screw in my case)
• (2x) M5 x 40mm bolts
• (2x) M5 x 12mm countersunk bolts (10mm will also work)
• (2x) M5 metal washer (for easier locking, optional)
• (3x) M5 nuts
• (2x) M5 self-locking nuts

Printing recommendations:

• Supports are only needed in the ‘grip-base' bottom holes. Will print without supports though but will need a bit of cleaning.
• It's holding your phone, so I'd print it with 3-4 perimeters for stronger parts. I printed mine with 2 perimeters and looks strong though.
• Infill at 15-20% is ok.