Yamaha Relit remote controller mounting bracket

This is a mounting bracket for standard remote controller for Yamaha Relit series.

You can mount it as you wish. On the wall or like me under the table.

To mount the bracket you will need three 3mm screws with tapered head.

Print Settings

Printer:

Anet A6

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

30

Notes:

Support required! Best settings in Cura: 35%, cross pattern.
Ater print just slide flat screwdriver between wall and support. It should pop out easily.