Stihl Chainsaw Choke Lever

This is a long obsoleted choke lever that fits Stihl 015L chainsaw and likely many others. Printed using .3 nozzle and .065 layer height. Make sure your machine is dialed in using a calibration cube to insure the lever will fit. Old part number is 1116_182_0800

Important: for best strength print oriented flat as in the above pictures.

06/18/2022- Added 1116_182_0800V2. This model has improved characteristics, the carb shaft hole is slightly smaller for a better fit, the round portion is slightly longer for clearance on the face of the saw and the lever has been angled to be more parallel to the saw.

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

Yes

Supports:

No

Resolution:

.065

Infill:

25%

Filament: Inland PLA or PETG black or orange

Notes:

Use a brim for adhesion. Print as oriented in the pictures above for best result. Use a .3 nozzle and .065 in order to be able to read the print on the lever. Good luck! Use the comment section to report issues.

Love this thing? Consider supporting my CAD habit. www.paypal.me/airrelic

Category: Replacement Parts