Screwless wall holder for vinyl records

I love to hang my vinyl on the wall, but don't really like making screw holes.
So i made this wall hanger for vinyl records that doesn't need any screws.

All you need is a couple of 3M Command strips (Size Medium). They are sold here in Europe as Picture hanging strips, Medium.

You apply one strip to the wall where you want your hanger, and apply one strip to the bracket that goes onto the wall. (Print the part that is going to be against the wall, laying down on your printer.)
I have tested the bracket and it's more than capable of holding even heavy 2LP vinyl on your wall with no issues (mine has hung for more than six months now.)

I printed this part in PETG, but there should not be an issue with printing it in PLA either.
Your printer needs to be decent at printing overhangs, but it shouldn't be an issue on most printers, i printed it fine on my stock Prusa MK3S

Edit:

• The wall mounted bracket has been tuned to fit better.
• I have included an optional part you can place on top of the wall mounted bracket to help getting the wall holder completely level. You can place a level on top of the included printed part.

Print instructions

Category: Household Supplies Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 15%

Filament: Prima Creator PETG Black
Notes:

Print with 3 or 4 perimeters for strength and rigidity.