Toilet paper hanger

Modern design of a toilet paper hanger. The plate can be mounted to a wall using glue or double sided tape.

Print the screw and arm with 100% infill for best durability.

1. Attach plate to wall. Note that the hole in the plate should be facing downwards so that the screw will not be visible.
2. insert sprint into mount (cylinder).
3. screw the mount a few turns and then insert the arm so that the notch lines up with the sprint.
4. Continue screwing until screw hole is visible in the plate.
5. insert screw (tip: use pliers). Do not use too much pressure otherwise the screw will break.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

100% for arm.

20% for everything else.

Filament:

Generic PLA - Silver

Notes:

Print screw and arm at 100% infill.

Category: Bathroom