Case for W3KKC's RA-35 Radio Adapter Interface Board

For someone putting up a low cost repeater, the cost of a USB Radio Interface for any type can be steep. That's one reason I was thrilled when I found W3KKC's RA-35 -- only problem was, it didn't come with a case. Well, that can be fixed =]

Here are some things to know about this case:

• No hardware required -- put the RA-35 in and snap the lid shut
• There are holes in the lid placed above each of the three LEDs
• No supports are required

I hope you find it useful =]

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

25%

Notes:

Make sure you turn the lid upside down so the flat (top) side is down else it won't likely work real well =]