Modified the cooling fan on my Alfawise U30pro to get some air around the stepper motors when printing ABS, PC-ABS or Nylon, so the housing was removed and a 60x20mm fan was added.
Unfortunately, the fan exceeded the total height the feet were capable to handle, so an extension was necessary...
Print 4 of them (used PTFE with 5% in the first 23mm and 20% for the rest in S3D using processes) - one for each feet and you're done!
Adding approx. 25mm to the overall height
Printer:
Alfawise U30pro
Rafts:
No
Supports:
No
Resolution:
0,2mm layer height
Infill:
5% + 20%
Filament:
Nothing special... PTFE Post-Printing =============Mounting
remove the original black caps on each feet and press the printed feet in place - the design is done to have a certain amount of friction when applied to avoid dropping out when moved.
That's it! Category: 3D Printer AccessoriesThe author marked this model as their own original creation. Imported from Thingiverse.