Canasta Hand and Foot with turntable

Playing Hand and foot with 8 decks of cards makes for a large center pile as well as a visual obstacle for players. So to help resolve that this model has two draw piles as well as a discard pile with accommodation for a card to be placed sideways to freeze the pile. All parts rest on a turntable so each player has the full view of everything on their play. Of course you do not have to use the turntable. Since this too large for most printers the base is done in 3 parts which you glue (CA) together. There are card suit inserts to prints as well if you want to fill in the inset on the card trays. Brims are at your discretion as some of the prints are of a large surface which are prone to curling. You know your printers best. Requires a 608 bearing for the turntable. Granted it is a long print but if you play type of canasta this it is well worth it.

I used pla

.2 resolution

70% speed for the card suit inserts as well as .15 resolution