Tube Squeeeeezer

Tube Squeeeeezer for different sizes of tubes and with a big handle 90x25mm to pull harder.

The holes for the tubes have these sizes:

• Small one: 5x90mm
• Bigger one: 10x90mm

This should allow to empty bigger sized tubes as well as small ones.

In case the size of the hole seemes to be to big, just put the tool into an ~45° angle to squeeze the tube more…

The thickness of the part is 7.5mm.

Printing instructions:

• 0.2mm speed profile
• 30% infill
• 4 outside walls for more strength
• No supports
• No brim

Happy printing :)