Raspberry Pi-revised Prusa MINI+ display box

Revised Prusa MINI+ display box, designed to fit inside a Raspberry Pi Zero W/W 2.

This is the best and easiest way to make your MINI WiFi connectable with OctoPrint.

You can also check the remixes and choose a design according your taste.

For fixing the RPi board, you will need two M3x8 mm screws. It’s connected to the Buddy control board via two cables - one USB A-to-micro USB for supplying power and one two sided micro USB for data transfer.

IMPORTANT!!!

1. Be sure that the micro USB-to-micro USB is DATA cable.
2. When adjusting the the position of the display, home the Z-axis first to avoid crashes with the Z stepper motor.