Anycubic Kobra Dual Spool Adapter

REMIX from:

https://social.thangs.com/m/106761

Thank you!

UPDATE: V2 - Trimmed down sides to fit on BOTH sides of the spool holder.

Made it shorter to fit normal 1kg spools using less material.

Extra Spool holder for the Anycubic Kobra.

Replaces the Spool Lock cap and makes it an extra spool holder.

Works perfectly with all 42mm+ spool adapters

• Pictured with my Overture Cardboard Spool Adapter found here:

https://www.printables.com/model/255576-overture-polyterra-cardboard-spool-adapter-45mm-55

Should just be narrow enough to leave in and store without removal.

Print Settings

Printer:

Anycubic Kobra

Rafts: 

No

Supports:

No

Resolution: 

.28

Infill:

20 - 25%

Filament:

SunLu/Overture PLA

Any

Notes:

Print Vertically with the locking end up.

Used a 8 count brim for build support - May not need if you have great bed adhesion

205 Extruder/60 Bed/20 Infill/100% speed

(Dependent upon your settings = Slower is better of course)

Please post Makes and Donate if your able. I do this for the love of the community, but any contributions are greatly appreciated. 

Category: 3D Printer Accessories