Magnifier

Magnifier

A small swing-to-open/close magnifier using a 20mm diameter lens (from a printer's loupe).

Fairly self-explanatory.  Push the magnifier glass handle onto the pivot on the top part and press on the bottom part.  Fix the top/bottom parts with a trace of superglue (CA).

The printer's loupe had a retaining circlip which holds the glass in place but you could glue it in or scale the print down so it's a tight fit.

Material:

PETG, PLA, etc
Layer height:  0.1mm
Supports & brim:  None
Infill:  Doesn't matter

Regards, Paul